• Tee

  • Pipe Tee, LT, Lateral tee , RT, Reducing tee, Tee fittings accord to ANSI, ISO, JIS and DIN Standards, Measures 1/2 to 56 Inches.
    A tee is also called triplet, three way and "T" pieces and it can be used to either combine or split a fluid flow. Most common are tees with the same inlet and outlet sizes, but 'reducing' tees are available as well. It means the one or two ends are differing in dimension. Due to this dimension differ, the makes the tee fittings with the capacity to control the volume when required.
    Key Specifications/Special Features:
    Size range: 1/2 to 56 inches (DN15 to DN1400)
    Pressure: SCH5 to SCH160, class 3000, 6000 and 9000
    Material: Carbon steel, stainless steel, malleable iron and brass,
    More Tee products:
    ·                     Hot pressure tee
    ·                     Welded latered tee
    ·                     A335 P91 Spheroidal tee
    ·                     A234 WPB forged tee
    ·                     Spheroidal tee
    ·                     A335 P91 forged lateral

     

    Nominal pipe size     
    Outside Diameter at Bevel Center to End
    D C M
    DN INCH    
    Series A Series B
    15 1/2" 21.3 18 25
    20 3/4" 26.9 25 29
    25 1 33.7 32 38
    32 1 1/4" 42.4 38 48
    40 1 1/2" 48.3 45 57
    50 2 60.3 57 64
    65 2 1/2" 76.1(73) 76 76
    80 3 88.9 89 86
    90 3 1/2" 101.6 95
    100 4 114.3 108 105
    125 5 139.7 133 124
    150 6 168.3 159 143
    200 8 219.1 219 178
    250 10 273 273 216
    300 12 323.9 325 254
    350 14 355.6 377 279
    400 16 406.4 426 305
    450 18 457.2 478 343
    500 20 508 529 381
    550 22 559 419
    600 24 610 630 432
    650 26 660 495
    700 28 711 720 521
    750 30 762 559
    800 32 813 820 597
    850 34 864 635
    900 36 914 920 673
    950 38 965 711
    1000 40 1016 1020 749
    1050 42 1067 762 711
    1100 44 1118 1120 813 762
    1150 46 1168 851 800
    1200 48 1220 1220 889 838